Cảm biến CD22-35A
Thông số kỹ thuật cảm biến Optex CD22-35A
đại lý optex | nhà phân phối optex | cảm biến quang optex | optex việt nam
Type | Measurement range | Repeat accuracy |
Analog output/serial interface | Control output | Connection type | Model |
---|---|---|---|---|---|---|
1 μm | 4 to 20 mA | NPN/PNP selectable by setting |
Cable type | Cảm biến CD22-15A | ||
Pig tail type | Cảm biến CD22-15AM12 | |||||
0 to 10 V | NPN/PNP selectable by setting |
Cable type | Cảm biến CD22-15V | |||
Pig tail type | Cảm biến CD22-15VM12 | |||||
RS-485 | – | Pig tail type | Cảm biến CD22-15-485M12 | |||
6 μm | 4 to 20 mA | NPN/PNP selectable by setting |
Cable type | Cảm biến CD22-35A | ||
Pig tail type | Cảm biến CD22-35AM12 | |||||
0 to 10 V | NPN/PNP selectable by setting |
Cable type | Cảm biến CD22-35V | |||
Pig tail type | Cảm biến CD22-35VM12 | |||||
RS-485 | – | Pig tail type | Cảm biến CD22-35-485M12 | |||
20 μm | 4 to 20 mA | NPN/PNP selectable by setting |
Cable type | Cảm biến CD22-100A2 | ||
Pig tail type | Cảm biến CD22-100AM122 | |||||
0 to 10 V | NPN/PNP selectable by setting |
Cable type | Cảm biến CD22-100V2 | |||
Pig tail type | Cảm biến CD22-100VM122 | |||||
RS-485 | – | Pig tail type | Cảm biến CD22-100-485M122 |
Model | Analog Current type |
Cable type | Cảm biến CD22-15A | Cảm biến CD22-35A | Cảm biến CD22-100A2 |
---|---|---|---|---|---|
Pig tail type | Cảm biến CD22-15AM12 | Cảm biến CD22-35AM12 | Cảm biến CD22-100AM122 | ||
Analog Voltage type |
Cable type | Cảm biến CD22-15V | Cảm biến CD22-35V | Cảm biến CD22-100V2 | |
Pig tail type | Cảm biến CD22-15VM12 | Cảm biến CD22-35VM12 | Cảm biến CD22-100VM122 | ||
Center of measurement range | 15 mm | 35 mm | 100 mm | ||
Measurement range | ±5 mm | ±15 mm | ±50 mm | ||
F.S. (full scale) | 10 mm | 30 mm | 100 mm | ||
Light source |
Medium/wavelength | Red semiconductor laser, wavelength: 655 nm | |||
Max. output | 390 μW | 1 mW | |||
Laser class |
IEC/JIS | Class 1 | Class 2*1 | ||
FDA | Class 1*2 | Class 2*2 | |||
Spot size*3 | Approx. 0.5 × 0.7 mm | Approx. 0.45 × 0.8 mm | Approx. 0.6 × 0.7 mm | ||
Linearity | ±0.1% F.S. | ||||
Repeat accuracy*4 | 1 μm | 6 μm | 20 μm | ||
Sampling period | 500 μs/1000 μs/2000 μs/4000 μs/AUTO | ||||
Temperature drift | ±0.02%/℃ F.S. | ±0.05%/℃ F.S. | |||
Indicators | Laser emission indicator (green)/zero reset indicator (red)/ output indicator (orange)/mode indicator (red) |
||||
External input | Laser OFF, teaching, sample & hold, one-shot, zero reset (selectable) | ||||
Analog output |
Current type | 4 to 20 mA, Load impedance: 300 Ω or less | |||
Voltage type | 0 to 10V, output impedance: 100 Ω | ||||
Control output | NPN/PNP open collector (selectable by setting), Max. 100 mA / 30 VDC, residual voltage 1.8 V |
||||
Supply voltage | 12 to 24 VDC ±10%*5 | ||||
Current consumption | 70 mA or less (at 24 VDC) | ||||
Connection type | Cable type: Cable length: 2 m, ø4.5 Pig tail type: Cable with M12, 5-pin connector, 300 mm length |
||||
Protection circuit | Reverse connection protection, overcurrent protection | ||||
Environmental resistance |
Degree of protection | IP67 (including joint of pig tail type) | |||
Ambient temperature/humidity | -10 to +50℃ / 35 to 85% RH (no freezing or condensation) | ||||
Ambient illuminance | Incandescent lamp 3,000 lx or less | ||||
Vibration resistance | 10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions |
||||
Shock resistance | Approx. 50 G (500 m/s2), 3 times in each of the X, Y, and Z directions |
||||
Applicable regulations | EMC directive (2004/108/EC) / FDA regulations (21 CFR 1040.10) | ||||
Applicable standards | EN 60947-5-7 | ||||
Warm-up time | Approx. 5 minutes | ||||
Material | Housing: Aluminum die-cast Front cover: PPSU Display: PET Cable: PVC |
||||
Weight | Cable type: Approx. 90 g Pig tail type: Approx. 60 g |
Model | Cảm biến CD22-15-485M12 | Cảm biến CD22-35-485M12 | Cảm biến CD22-100-485M122 | |
---|---|---|---|---|
Center of measurement range | 15 mm | 35 mm | 100 mm | |
Measurement range | ±5 mm | ±15 mm | ±50 mm | |
F.S. (full scale) | 10 mm | 30 mm | 100 mm | |
Light source |
Medium/wavelength | Red semiconductor laser, wavelength: 655 nm | ||
Max. output | 390 μW | 1 mW | ||
Laser class |
IEC/JIS | Class 1 | Class 2*1 | |
FDA Class | Class 1*2 | Class 2*2 | ||
Spot size | Approx. 0.5 × 0.7 mm | Approx. 0.45 × 0.8 mm | Approx. 0.6 × 0.7 mm | |
Linearity | ±0.1% F.S. | |||
Repeat accuracy*4 | 1 μm | 6 μm | 20 μm | |
Sampling period | 500 μs/1000 μs/2000 μs/4000 μs/AUTO | |||
Temperature drift | ±0.02%/℃ F.S. | ±0.05%/℃ F.S. | ||
Indicators | Laser emission indicator (green)/zero reset indicator (red)/ output indicator (orange)/mode indicator (red) |
|||
Serial interface*5 | RS-485 half duplex communication (9.6 k to 1,250 kbps) | |||
Supply voltage | 12 to 24 VDC ±10% | |||
Current consumption | 70 mA or less (at 24 VDC) | |||
Connection type | Pig tail type: Cable with M12, 5-pin connector, 300 mm length | |||
Protection circuit | Reverse connection protection | |||
Environmental resistance |
Degree of protection | IP67 (including joint of connector) | ||
Ambient temperature/humidity | -10 to +50℃ / 35 to 85% RH (no freezing or condensation) | |||
Ambient illuminance | Incandescent lamp 3,000 lx or less | |||
Vibration resistance | 10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions |
|||
Shock resistance | Approx. 50 G (500 m/s2), 3 times in each of the X, Y, and Z directions |
|||
Applicable regulations | EMC directive (2004/108/EC) / FDA regulations (21 CFR 1040.10) | |||
Applicable standards | EN 60947-5-2 | |||
Warm-up time | Approx. 5 minutes | |||
Material | Housing: Aluminum die-cast Front cover: PPSU Display: PET Cable: PVC |
|||
Weight | Approx. 60 g |
Đánh giá
Chưa có đánh giá nào.