Cảm biến LR8010
Cảm biến LR0000B-BR34AVPKG/US
Cảm biến LR8010
Cảm biến mức LR8010
đại lý LR8010
nhà phân phối LR8010
Đặc tính sản phẩm
| Số lượng đầu vào và đầu ra | Số lượng đầu ra kỹ thuật số: 4 |
|---|---|
| Chiều dài đầu dò L [mm] | 100…1600 |
| Kết nối quá trình | G 3/4 external thread |
Ứng dụng
| Tính năng đặc biệt | Gold-plated contacts |
|---|---|
| Installation | Operation only in conjunction with rod and coaxial pipe. |
| Phương tiện truyền thông | hydrous coolants; oils; oil-based media; water; media similar to water |
| Dielectric constant of the medium | ≥ 2 |
| Không thể được sử dụng cho | See the operating instructions, chapter “Function and features”. |
| Process temperature [°C] | 0…80; (see note under remarks) |
| Định mức áp suất [bar] | 4 |
| Vacuum resistance [mbar] | -500 |
Dữ liệu điện
| Điện áp hoạt động [V] | 18…30 DC |
|---|---|
| Mức tiêu thụ hiện tại [mA] | |
| Lớp bảo vệ | III |
| Bảo vệ phân cực ngược | yes |
| Thời gian trễ bật nguồn [s] | |
| Measuring principle | guided wave radar |
Đầu vào/ra
| Số lượng đầu vào và đầu ra | Số lượng đầu ra kỹ thuật số: 4 |
|---|
Đầu ra
| Tổng số đầu ra | 4 |
|---|---|
| Tín hiệu đầu ra | switching signal |
| Thiết kế điện | PNP |
| Số lượng đầu ra kỹ thuật số | 4 |
| Hàm đầu ra | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V] | 2.5 |
| Dòng điện đầu ra DC [mA] | 200 |
| Bảo vệ ngắn mạch | yes |
| Loại bảo vệ ngắn mạch | thermal, pulsed |
| Bảo vệ quá tải | yes |
Dải đo/cài đặt
| Chiều dài đầu dò L [mm] | 100…1600 |
|---|---|
| Active range A [mm] | L-40; (when set to oil and oil based media: L-60) |
| Inactive range I1 / I2 [mm] | 30 / 10; (when set to oil and oil based media: 30 / 30) |
| Sampling rate [Hz] | 4 |
| Đặt điểm SP [mm] | ≥ 15….L-30 | |
|---|---|---|
| Note on setpoint SP |
|
|
| Đặt lại điểm rP [mm] | ≥ 10… L-35 | |
| Note on reset point rP |
|
|
| Trong các bước của [mm] | 5 | |
| Hysteresis [mm] | > 5 | |
| Overflow switch point OP [mm] | 70…L-30 | |
| Hysteresis, OP [mm] | 10 |
Accuracy / deviations
| Repeatability [mm] | ± 5 |
|---|---|
| Measuring error [mm] | ± 7 |
| Offset error [mm] | 5 |
| Nghị quyết [mm] | 1 |
| Temperature drift per 10 K | ± 0.2 % |
Giao diện
| Phương thức giao tiếp | IO-Link | ||||
|---|---|---|---|---|---|
| Kiểu truyền tải | COM2 (38,4 kBaud) | ||||
| Bản sửa đổi IO-Link | 1.1 | ||||
| SDCI standard | IEC 61131-9 | ||||
| Profiles | no profile | ||||
| SIO mode | yes | ||||
| Loại cổng chính bắt buộc | A | ||||
| Xử lý dữ liệu tương tự | 1 | ||||
| Xử lý dữ liệu nhị phân | 4 | ||||
| Min. process cycle time [ms] | 2.3 | ||||
| Supported DeviceIDs |
|
Điều kiện hoạt động
| Nhiệt độ môi trường [°C] | 0…60 |
|---|---|
| Nhiệt độ bảo quản [°C] | -25…80 |
| Sự bảo vệ | IP 67 |
Thử nghiệm / phê duyệt
| Approval | WHG; General building authority approval; overflow prevention | ||||||
|---|---|---|---|---|---|---|---|
| EMC |
|
||||||
| Chống sốc |
|
||||||
| Chống rung |
|
||||||
| MTTF [years] | 198 |
Dữ liệu cơ học
| Trọng lượng [g] | 402 |
|---|---|
| Vật liệu | stainless steel (1.4404 / 316L); stainless steel (1.4301 / 304); FKM; PBT; PC; PEI; TPE-V |
| Vật liệu (wetted parts) | sensor:: stainless steel (1.4305 / 303); stainless steel (1.4435 / 316L); PTFE; FKM; NBR reinforced fibre; Probe:: stainless steel (1.4404 / 316L); Coaxial pipe:: stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); stainless steel (1.4310 / 301); PPS reinforced fibre |
| Kết nối quá trình | G 3/4 external thread |
Màn hình / yếu tố vận hành
| Màn hình |
|
|---|
Chú thích
| Notes | For high process temperatures: The temperature at the process connection is decisive. The actual medium temperature may be higher. |
|---|---|
| Số lượng đóng gói | 1 pcs. |
Kết nối điện
| Kết nối | Connector: 1 x M12; coding: A; Contacts: gold-plated |
|---|
Diagrams and graphs
|
|
|---|



