Cảm biến E2E-X5E2

Danh mục: Cảm biến tiệm cận Thương hiệu: Omron

Cảm biến E2E-X5E2

Thông số kỹ thuật cảm biến tiệm cận E2E-X5E2:

Type	Shielded
Sensing method	Inductive type
Sensing distance	5 mm-10% to +10%
Setting distance	0 to 4 mm
Differential distance	10% Max. of sensing distance
Sensing object	Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Standard sensing object	Iron 18 x 18 x 1 mm
Power supply voltage	12 to 24 VDC ripple(p-p) 10% Max.
Operating voltage range	10 to 30 VDC
Current consumption	13　mA　max.
Control output (Output type)	NPN voltage-current output
Control output (Switching capacity)	0 to 200 mA
Indicator	Operation indicator (red)
Operation mode	NC
Sensitivity setting	–
Self-diagnostic output	–
Protective circuit	Surge suppressor Output short-cut protection Power supply reverse polarity protection
Standard or Different frequency	Standard
Ambient temperature	Operating: -40 to 85 ℃ Storage: -40 to 85 ℃
Ambient humidity	Operating: 35 to 95%RH Storage: 3595%RH
Temperature influence	+/- 10% Max. of sensing distance in temperature range of -25 to +70 CEL +/- 15% Max. of sensing distance in temperature range of -40 to +85 CEL (As the basis for sensing distance of 23 CEL
Voltage influence	+/- 1% Max. of sensing distance in rated voltage range +/- 15%. (As the basis for sensing distance at standard power voltage)
Insulation resistance	50 MOhm Min. at 500 VDC between charged parts and the case
Dielectric strength	1000 VAC 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	1000 m/s**2 for 10 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP67 Company standard: Oil-proof
Connection method	Pre-wired models(Cable length: 2 m)
Weight (Packed state)	approx. 150 g
Material (case)	Brass nickel plating
Material (sensing surface)	PBT
Material (clamping nuts)	Brass nickel plating
Material (toothed washer)	Iron zinc plating
Accessories	Instruction manual